Gsr750 Service Manual [TOP]

| Fastener | Thread size | Torque (Nm) | Notes | |----------|-------------|-------------|-------| | Front axle pinch bolt | M8 | 23 | Left fork leg | | Front axle nut | M14 | 72 | Apply anti-seize | | Rear axle nut | M20 | 105 | + cotter pin | | Caliper mounting bolts | M10 | 40 | Use thread locker (blue) | | Steering stem nut | M22 | 95 | Final after bearing preload | | Engine oil drain plug | M12 | 23 | New crush washer each time | | Cylinder head bolt | M10 | 42 + 90° | Tighten in sequence | | Clutch hub nut | M18 | 130 | Use holding tool | | Flywheel rotor bolt | M16 | 150 | LH threads? No, RH. |

A full service manual (distinct from the thin "Owner's Manual") covers deep technical repairs: gsr750 service manual

| Setting | Front (Showa BPF) | Rear (BFRC-lite) | |---------|------------------|------------------| | | 7 turns out from full in (std) | 9 mm thread exposed (std) | | Compression damping | 12 clicks out | 14 clicks out | | Rebound damping | 10 clicks out | 12 clicks out | | Oil capacity (front) | 528 mL per leg (Suzuki SS-05 or 10W) | N/A | | Air gap (front) | 110 mm (spring out, tube compressed) | N/A | | Fastener | Thread size | Torque (Nm)