Locate the numeric key corresponding to your brand in the brand table (if available in the printed manual).
Press the button again; the light will start flashing. chunghop eh907 manual full
Avoid fake "manual download" sites that ask for credit card info. The Chunghop EH907 manual is free. Locate the numeric key corresponding to your brand
Press and hold the button (roughly 4–10 seconds) until the LED starts flashing, indicating it is cycling through frequencies. The Chunghop EH907 manual is free
| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | | Dead batteries | Replace with fresh AA/AAA batteries. | | Remote works, but not all buttons | Wrong code mode | Reprogram using a different 4-digit code for your brand. | | Device responds very slowly | Weak signal or obstacles | Clean the IR emitter (front tip) with a soft cloth. Ensure line-of-sight. | | Code search fails to find device | Device uses RF, not IR | The EH907 is infrared only. It will not control Bluetooth or RF-only devices (some modern Roku sticks or Fire TV). | | Volume controls the TV when in DVD mode | Volume lock is set to TV | This is a feature, not a bug. Follow "Volume Lock" above to change. | | Remote controls two devices at once | Code conflict | Reset the remote fully and reprogram one device at a time without pressing extra buttons. |
Each press sends a new code. When the volume bar appears on your TV, press to save the code. Troubleshooting and Maintenance E-H907-TV remote control for Hisense- CHUNGHOP.COM
: Try the MUTE or VOLUME buttons. If they don't work, repeat the process with the next code in the list. 2. Manual Code Search Use this method if the brand codes do not work: