Aluminum alloy and stainless steel with anti-twist pins.
While the main camera body is typically updated via DJI Assistant 2 , the mount itself often requires this standalone tool to ensure the E-mount hardware is running the latest version . Relevant Resources mali mount upgrade tool
| Symptom | Probable Cause | Solution using the Upgrade Tool | | :--- | :--- | :--- | | Hydraulic ram stalls before mount moves | Corrosion welding or bent bolt | Switch to the tool’s mode (if equipped) or apply penetrating oil for 24 hrs. | | New mount won't seat fully | Old bushing fragment left in bore | Use the line-boring insert to shave 0.1mm off the bore ID. | | Alignment guides won't clamp | Mast wear beyond spec | Machine the mast rails flat using a portable mill, then use the tool’s shim kit to adapt. | | Torque multiplier skips teeth | Broken gear | Stop immediately. Replace the multiplier head. Do not use impact wrenches on it. | Aluminum alloy and stainless steel with anti-twist pins
I was a bit hesitant about upgrading the mount on my Mali setup, but this tool made the whole process smooth and frustration-free. The instructions were clear, the fit was precise, and it saved me a ton of time compared to doing it manually. No forcing or alignment issues – everything clicked into place as promised. If you’re running a Mali-based device and need a reliable mount upgrade, this tool is absolutely worth it. Highly recommended for both beginners and experienced users. | | New mount won't seat fully |
: It assists in upgrading the kernel-side "Base Driver" to match newer firmware releases, often required for new hardware features or security patches.