Erhardt-leimer Do 3001 Manual Upd [Exclusive Deal]

| Symptom | Likely Cause | Solution | | :--- | :--- | :--- | | | Gain (P-band) is too high. | Enter parameters and reduce the Gain or increase the P-Band (Proportional Band). | | Web drifts slowly | Gain is too low. | Increase the Gain slightly. | | "Sensor Error" message | Sensor disconnected or dirty. | Clean the sensor lens (optical) or check cable continuity. | | Guide does not move | Limit switch activated. | Check if the guide frame is physically hitting the end stops. Reset the frame to the center manually. | | Correction is backwards | Motor polarity wrong. | Invert the Correction Direction in the parameters. |

: There are websites dedicated to hosting manuals for a wide range of devices and machinery. You might find success searching for the manual on one of these sites. Erhardt-leimer Do 3001 Manual