A dual system utilizing a strong linear magnetic resistance paired with air resistance for smooth tension. Levels: 16 different preset resistance levels.
| Symptom | Likely Cause (From Manual) | Solution | | :--- | :--- | :--- | | | Dead internal battery; AC adapter not seated. | Leave on charger for 12 hours. Try a 12V DC car adapter. | | Negative watts reading | CT polarity reversed on Phase A, B, or C. | Check arrow on CT clamp points toward the load. Swap CT wires if using split-core adapters. | | "Err 07" on screen | Voltage harmonic calculation overflow. | Manually set your nominal voltage (120V, 230V, 480V) in System Setup, not "Auto." | | Data log is empty | SD card not formatted correctly. | Format card FAT32 with 4096-byte allocation unit size. Do not use quick format. | | Erratic frequency reading | Noisy waveform (VFD or welder nearby). | Enable "Filter" mode via Utility > Advanced > Freq Filter = On . | proteus par5500 manual
Includes a built-in fan that can be directed toward the user during high-intensity training. A dual system utilizing a strong linear magnetic
Press 'Start' immediately to begin a free-rowing session. | Leave on charger for 12 hours
Automatically adjusts tension based on user performance to maintain a fixed power output.