Fanuc Parameter List Upd -

| Function | Typical Parameter | Notes | |----------|------------------|-------| | Inch/Metric | 0000#0 (0=metric, 1=inch) | Requires power cycle | | I/O channel (RS-232) | 0020 (0,1,2,3,4,5,9,10) | For DNC or file transfer | | Background edit | 3106#5 (0=enable) | 0i control | | High-speed machining (AICC) | 1604#0 (1=on), 3401#1 (1=on) | Some controls | | Tool offset memory type | 0013#0 (0=C, 1=2D) | C-type = geometry+wear | | Mirror image | 0012#0 (X axis) | Also axis-specific |

: Press the OFFSET/SETTING hard key on the MDI panel. Enable PWE : fanuc parameter list upd

Note: The control will trigger a "P/S 100" alarm, which is a normal warning indicating that the parameter write function is active. Part Counts on Fanuc CNC Machines - FactoryWiz | Function | Typical Parameter | Notes |

If you have a .txt or .raw parameter file from the machine builder: | | Axis Control/Setting | 1000–1999 | Servo

| Type | Number Range | Description | |------|-------------|-------------| | | 0–31 | Basic machine settings (edit enable, inch/mm, I/O channel) | | NC Parameters | 100–9999 | Axis, feedrate, reference position, etc. | | Axis Control/Setting | 1000–1999 | Servo and spindle parameters | | PMC Parameters | D, K, C, T, A | Ladder logic data (K keep relays, D data table) | | Macro Variables | #100–#199, #500–#999 | User macros (some are permanent) |

Param_No,Value,Comment 1420,15000,Rapid X 1421,2000,Jog X 1815,00000010,APC/APZ